HP ProLiant StorageWorks NAS 1500s, Руководство по установке

Страница: 21 / 54

NAS 1500s Installation Guide 21
Setup and configuration overview
Setting up systems is a well-defined process. This section is
intended as an overview of the process, not a detailed list of
step-by-step instructions. Step-by-step procedures are
documented in the administration guide. Some of the steps are
driven by wizards within the WebUI. In either type of setup, it is
important to read all of the supplied documentation before
starting. Relevant documents include:
■
HP StorageWorks NAS 1500s Administration Guide
■
HP StorageWorks NAS 1500s Rack Installation Instructions
■
HP StorageWorks NAS 1500s Release Notes (if required, this
document will be available at
http://www.hp.com/go/nas
)
Configuring the NAS 1500s
The following steps describe how to configure the NAS 1500s.
1. Configure the NAS device using Chapter 2 of this guide.
2. This is a recommended step. Place the NAS device into an
Active Directory or Windows NT
®
4.0 domain for ease of
manageability.
3. This is an optional step. Enable protocols such as NFS
sharing, NCP, and/or AppleTalk. See the administration guide
for this procedure in detail.
4. This is an optional step. Create shares corresponding to the
protocols mentioned in the previous steps. Grant access rights
to the shares.
5. Read the remaining sections of the administration guide.
Note: By default the data drive (F:) is configured and ready for use.