HP ProLiant SL210t Gen8 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 103

background image

Software and configuration utilities 73

see the Resources tab on the HP website update packages, see the HP Systems and Server Software Management page on the HP website

HP Insight Diagnostics

HP Insight Diagnostics is a proactive node management tool, available in both offline and online versions,
that provides diagnostics and troubleshooting capabilities to assist IT administrators who verify node
installations, troubleshoot problems, and perform repair validation.
HP Insight Diagnostics Offline Edition performs various in-depth system and component testing while the OS
is not running. To run this utility, boot the node using Intelligent Provisioning (on page

HP Insight Diagnostics Online Edition is a web-based application that captures system configuration and
other related data needed for effective node management. Available in Microsoft Windows and Linux
versions, the utility helps to ensure proper system operation.
For more information or to download the utility, see the HP website Insight Diagnostics Online Edition is also available in the SPP ("

HP Service Pack for ProLiant

" on page

HP Insight Diagnostics survey functionality

HP Insight Diagnostics (on page

) provides survey functionality that gathers critical hardware and software

information on ProLiant nodes.
This functionality supports operating systems that are supported by the node. For operating systems
supported by the node, see the HP website If a significant change occurs between data-gathering intervals, the survey function marks the previous

information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every Intelligent Provisioning-assisted HP Insight Diagnostics installation,

or it can be installed through the SPP ("

HP Service Pack for ProLiant

" on page

Erase Utility

CAUTION:

Perform a backup before running the Erase Utility. The utility sets the system to its

original factory state, deletes the current hardware configuration information, including array

setup and disk partitioning, and erases all connected hard drives completely. Before using this
utility, see the instructions in the

HP Intelligent Provisioning User Guide

.

Use the Erase Utility to erase drives and Active Health System logs, and to reset RBSU settings. Run the Erase

Utility if you must erase the system for the following reasons:

•

You want to install a new operating system on a node with an existing operating system.

•

You encounter an error when completing the steps of a factory-installed operating system installation.

To access the Erase Utility, click the Perform Maintenance icon from the Intelligent Provisioning home screen,

and then select

Erase

.

For more information about the Erase Utility, see the

HP Intelligent Provisioning User Guide

on the HP website

«
...
71
72
73
74
75
...
»

Содержание ProLiant SL210t Gen8








































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant SL210t Gen8

Enterprise Server

Бренд: Blackberry Страницы: 88

Бренд: IBM Страницы: 128

Бренд: Gigabyte Страницы: 115

RS/6000 44P Series 270

Бренд: IBM Страницы: 346

Бренд: TYANO Страницы: 102

IDS-5042 Series

Бренд: ORiNG Страницы: 67

AcquiLite EMB A7810

Бренд: Obvius Страницы: 29

FusionServer 2298 V5

Бренд: Fusion Страницы: 89

Бренд: Lenovo Страницы: 14

ThinkSystem SR850 V2

Бренд: Lenovo Страницы: 288

IdeaCentre 3013

Бренд: Lenovo Страницы: 1

Бренд: Lenovo Страницы: 24

System x3550 M5

Бренд: Lenovo Страницы: 59

Бренд: Lenovo Страницы: 54

ThinkAgile VX2320

Бренд: Lenovo Страницы: 108

IdeaCentre D400

Бренд: Lenovo Страницы: 43

Flex System x240 M5

Бренд: Lenovo Страницы: 40

System x3250 M5

Бренд: Lenovo Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды