manualshive.com logo in svg

HP ProLiant ML30 Gen10 Plus, Руководство пользователя

HP ProLiant ML30 Gen10 Plus - надежный серверный компьютер для вашего бизнеса. На нашем сайте вы можете бесплатно скачать руководство пользователя (User Manual) для этой модели. Получите все необходимые инструкции и сведения для правильной настройки и использования вашего сервера. Посетите manualshive.com для скачивания.

Поделиться
Скачать
background image

Configuration and diagnostic utilities

Configuration and diagnostic utilities

This chapter provides information about common utilities that might not apply to your server. For information about server

compatibility with the utilities listed in this chapter, see the product QuickSpecs at the Hewlett Packard Enterprise website
(https://www.hpe.com/info/qs

https://www.hpe.com/info/qs).

NOTE: 

NOTE: Servers ordered from HPE Factory Express might have already been configured with all or some of the steps

provided in this chapter. Refer to your order from HPE Factory Express to determine if any additional steps are

required for setup.

Installing an operating system

Installing an operating system

To install an operating system on a server, first use iLO Virtual Media to connect the OS installation media to the server. Information
about iLO Virtual Media is in the iLO User Guide at www.hpe.com/support/ilo-docs

www.hpe.com/support/ilo-docs. Then, use the Intelligent Provisioning Setup Wizard

(www.hpe.com/info/intelligentprovisioning/docs

www.hpe.com/info/intelligentprovisioning/docs) to install the operating system.

For a list of supported operating systems, see the HPE Servers Support & Certification Matrices at  www.hpe.com/support/Servers-

www.hpe.com/support/Servers-

Certification-Matrices

Certification-Matrices.

Configuring the initial setup of a server

Configuring the initial setup of a server

To configure

To configure

Use

Use

Single server (graphical user interface)

Guided process: 

Guided process: Intelligent Provisioning

(www.hpe.com/info/intelligentprovisioning/docs

www.hpe.com/info/intelligentprovisioning/docs)

Manual process: 

Manual process: HPE iLO web interface accessed by  iLO

remote console. Refer to the iLO online help for more
information about iLO remote console.

Menu-based process: 

Menu-based process: UEFI System Utilities

(https://www.hpe.com/info/UEFI-manual

https://www.hpe.com/info/UEFI-manual)

Single server (scripting)

Using CLI for Windows and Linux to configure Redfish settings

Using CLI for Windows and Linux to configure Redfish settings

on a Gen10 or later server: 

on a Gen10 or later server: RESTful Interface Tool

(www.hpe.com/support/restfulinterface/docs

www.hpe.com/support/restfulinterface/docs)

Using Python:

Using Python: Python iLO Redfish Library (python-ilorest-

library) (github.com/HewlettPackard/python-ilorest-library

github.com/HewlettPackard/python-ilorest-library)

Using PowerShell for Windows-based environments:

Using PowerShell for Windows-based environments:

PowerShell cmdlets
(https://www.hpe.com/info/powershell/docs

https://www.hpe.com/info/powershell/docs)

Directly to the API using cURL or any other programming

Directly to the API using cURL or any other programming

interface: 

interface: iLO RESTful API

(https://hewlettpackard.github.io/ilo-rest-api-docs/

https://hewlettpackard.github.io/ilo-rest-api-docs/)

Multiple servers (either UI or scripting)

HPE OneView (https://www.hpe.com/support/oneview-docs

https://www.hpe.com/support/oneview-docs)

Intelligent Provisioning is not available to HPE Synergy Gen11 Compute Modules.

For servers running HPE OneView, do not use another tool, such as  iLO, to delete or change certain settings. For more information
about using HPE OneView and iLO to manage the same server, see the  iLO User Guide at www.hpe.com/support/ilo-docs

www.hpe.com/support/ilo-docs.

Configuring storage controllers

Configuring storage controllers

To determine the storage controllers that are supported by your server, see the product QuickSpecs at the Hewlett Packard Enterprise
website (https://www.hpe.com/info/qs

https://www.hpe.com/info/qs).

Controller type

Controller type

Documentation

Documentation

SR hardware RAID

SR hardware RAID

—

Gen10 Plus

HPE SR Gen10 Plus Controller User Guide  at
https://www.hpe.com/info/SR-Gen10Plus-UG

https://www.hpe.com/info/SR-Gen10Plus-UG

1

2

1
2

Configuration and diagnostic utilities

200

Содержание ProLiant ML30 Gen10 Plus







































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant ML30 Gen10 Plus

IBM Netfinity 1000 Installation Instructions Manual preview
Netfinity 1000
Бренд: IBM Страницы: 44
NEC Express5800/320Fa-L User Manual preview
Express5800/320Fa-L
Бренд: NEC Страницы: 406
Supero SUPERSERVER 5017C-MF User Manual preview
SUPERSERVER 5017C-MF
Бренд: Supero Страницы: 96
Supermicro A+ AS-2124US-TNRP User Manual preview
A+ AS-2124US-TNRP
Бренд: Supermicro Страницы: 130
IBM xSeries 200VL Installation Manual preview
xSeries 200VL
Бренд: IBM Страницы: 70
EXAGATE SYSGuard 3001 Quick Installation Manual preview
SYSGuard 3001
Бренд: EXAGATE Страницы: 8
Oce Repro Desk User Manual preview
Repro Desk
Бренд: Oce Страницы: 464
Advantech ASR-3100 Startup Manual preview
ASR-3100
Бренд: Advantech Страницы: 6
QCT STRATOS S910 Series User Manual preview
STRATOS S910 Series
Бренд: QCT Страницы: 41
Initsys Vid1VideoServer Installation Manual preview
Vid1VideoServer
Бренд: Initsys Страницы: 15
Tektronix MSO54 Programmer'S Manual preview
MSO54
Бренд: Tektronix Страницы: 1026
3Com SuperStack 3 WEBCACHE 1000 User Manual preview
SuperStack 3 WEBCACHE 1000
Бренд: 3Com Страницы: 362
TROY Group C7200n User Manual preview
C7200n
Бренд: TROY Group Страницы: 60
Sun Oracle Netra X6270 M3 Security Manual preview
Netra X6270 M3
Бренд: Sun Oracle Страницы: 16
IBM 5147-084 Installation And User Manual preview
5147-084
Бренд: IBM Страницы: 82
Hama USB Multifunction Server Operating Instruction preview
USB Multifunction Server
Бренд: Hama Страницы: 32
IBM 7944E1U Brochure & Specs preview
7944E1U
Бренд: IBM Страницы: 2
QNAP Turbo NAS HS-210 Hardware User Manual preview
Turbo NAS HS-210
Бренд: QNAP Страницы: 87

Бренды по названию

Популярные бренды

Загрузить еще бренды