Connectors, Jumpers, and LEDs
4-6
HP ProLiant ML150 Generation 2 Server Maintenance and Service Guide
HP CONFIDENTIAL Codename: Stone Soup 2 Part Number: 368148-003 Last Saved On: 4/19/05 5:18 PM
Clearing System Configuration Settings
It may be necessary at some time to clear system configuration settings. When the system
configuration jumper J29 is set to the Clear CMOS position, the system is prepared to erase
all system configuration settings from both CMOS and nonvolatile RAM (NVRAM):
IMPORTANT: Clearing NVRAM deletes the configuration information.
1.
Complete the preparation procedures. Refer to “Preparation Procedures” in Chapter 2.
2.
Remove the access panel. Refer to “Access Panel” in Chapter 2.
3.
Set the system configuration jumper J29 to the Clear CMOS position. All configuration
settings are now erased and all system operations halt.
4.
Wait for five seconds, and then reset the jumper J29 to the Normal position.
5.
Replace the access panel.
6.
Power up the server.
7.
Reset all system configuration settings.
