HP ProLiant ML150 G6, Руководство по техническому обслуживанию и ремонту

Страница: 43 / 114

Removal and replacement procedures 43
Removing a processor
To remove a processor, proceed as follows:
1.
Power down the server.
2.
Disconnect the power cord(s).
3.
Unlock the server if necessary and remove the access panel (refer to section “System covers”).
4.
On the air baffle, pull the four tabs out slightly and lift the baffle away from the chassis.
Figure 3-19 Removing the air baffle
5.
Place the server on its side with the open side up.
6.
Remove the heatsink (Figure 3-20).
Figure 3-20 Removing the heatsink
7.
Loosen the heatsink mounting screws (Figure 3-20, 1) and lift the heatsink away from the system
board (Figure 3-20, 2).
CAUTION: If the heatsink is to be reused, carefully place the heatsink in a position where the base
(processor contact area) will not come in contact with foreign material.
All manuals and user guides at all-guides.com