
Hardware options installation 63
HP dual microSD to USB adapter option
To install the component:
1.
Power down the server (on page
18
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Place the server on its side.
4.
Remove the access panel (on page
18
).
5.
If installed, remove the PCI air baffle (on page
22
).
6.
Remove the system air baffle (on page
23
).
7.
If installed, remove the HP Smart Storage Battery.
8.
Install the device adapter on the system board.
9.
Install the HP Smart Storage Battery on the server.
10.
Install the system air baffle (on page
24
).
11.
If removed, install the PCI air baffle ("
Install the PCI air baffle
" on page
22
).
12.
Install the access panel (on page
19
).
13.
Return the server to an upright position.
14.
Connect each power cord to the server.
15.
Connect each power cord to the power source.
16.
Power up the server (on page
18
).
Memory options
IMPORTANT:
This server does not support mixing LRDIMMs or RDIMMs. Attempting to mix any
combination of these DIMMs can cause the server to halt during BIOS initialization.
Содержание ProLiant ML110 Gen9
