Hardware options installation 52
9.
Open the PCIe slot cover retainer and remove the slot 3 blank.
10.
Install the storage controller and close the PCIe slot cover retainer.
11.
If you installed a cache module on the storage controller, connect the cache module cable to the system
board connector. For cache module cabling information, see "FBWC module cabling (on page
91
)".
12.
Connect all necessary cables to the storage controller and drive cage backplane. For internal drive
cabling information, see "Storage cabling (on page
84
)."
13.
Install the system air baffle (on page
24
).
14.
If removed, install the PCI air baffle ("
Install the PCI air baffle
" on page
22
).
15.
Install the access panel (on page
19
).
16.
Return the server to an upright position.
17.
Connect each power cord to the server.
18.
Connect each power cord to the power source.
19.
Power up the server (on page
18
).
Содержание ProLiant ML110 Gen9
