HP ProLiant EC200a Скачать руководство пользователя страница 22

Страница: 22 / 73

Setup 22

•

Confirm that the installation engineer understands how to integrate the server into the user network,

in particular from an IP addressing perspective and from a domain perspective.

•

Prepare Ethernet cables of an appropriate length for each of the LAN, WAN, and remote

management (iLO) connections.

•

Verify that there are sufficient ports available on the devices to which the server will be connected

(for example, router, LAN switch).

Identify the contents of the server shipping carton

Unpack the server shipping carton and locate the materials and documentation necessary for installing

the server.
The contents of the server shipping carton include:

•

Server

•

Power adapter (120 W)

•

Power cord

•

Printed setup documentation

Place the server in the intended location

Place the server in the intended location provided that this location fully satisfies the requirements for

optimum environment ("

Operating environmental requirements

" on page

Do not connect the power cord to the power source yet.

Install the server on the mounting/docking hardware

If you intend to set up the server in a cradle, wall mount, or storage expansion unit, do one of the following:

•

Install the server in the cradle ("

Installing the server in the cradle

" on page

•

Install the server in the wall mount ("

Installing the server in the wall mount

" on page

•

Install the server on the storage expansion unit ("

Installing the server on the storage expansion unit

on page

Do not connect the power cord to the power source yet.

Perform the initial server installation

For detailed server installation procedures, go to the HPE ProLiant Easy Connect Support Portal

(

https://support.prolianteasyconnect.com

For network cabling procedures, see "Rear panel components (on page

)" for the location of the server

Ethernet connectors.

To experience quicker service and more efficient support, register the product at the Hewlett Packard

Enterprise Product Registration website (

http://www.hpe.com/info/register

Содержание ProLiant EC200a










































































Результаты поиска

Содержание ProLiant EC200a

Отзывы:

Похожие инструкции для ProLiant EC200a

Бренды по названию

Популярные бренды

HP ProLiant EC200a, Руководство пользователя

Результаты поиска

Содержание ProLiant EC200a

Отзывы:

Похожие инструкции для ProLiant EC200a

Бренды по названию

Популярные бренды