NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE:
Configure-to-order (CTO) servers must start with a CTO Chassis.
NOTE:
FIO indicates that this option is only available as a factory installable option.
NOTE:
USE AM451A when configuring the system with Intel Xeon® E7-4800 and E7-2800 Series Processor.
Step 1: Base Configuration
HP Model
HP ProLiant DL980 G7 Configure-to-order Server
NOTE:
Use with Intel Xeon® E7-4800 and E7-2800 Series Processors only
AM451A
Factory Integrated Model ships with:
Choose between:
HP ProLiant DL980 NC375i SPI Board Or
HP ProLiant DL980 331i SPI Board
Eight HP Memory Boards
Five PCI-express slots
HP Smart Array P410i/Zero Memory Controller
Four 1200W Common Slot Platinum hot-plug power supplies
Eight redundant hot plug fans
SFF SAS drive cage
HP Integrated Lights-Out 3 (iLO 3) management processor (integrated on system
board)
Rack form factor, 8U
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
HP Processors
NOTE:
Each processor kit contains four processors.
NOTE:
If eight processors are desired select one xxxxxx-L21 and one xxxxxx-B21.
Additionally one HP DL980 CPU Assembly: P/N: AM450A for Intel® Xeon® E7-4800 and
E7-2800 Series Processors will be required. AM451A is required base configuration for
Intel® Xeon® E7-4800 and E7-2800 Series Processors.
Ten-Core Processors
HP DL980 G7 Intel® Xeon® E7-2850 (2.0Ghz/10-core/24MB/130W) FIO 4-processor Kit
NOTE:
QPI speed is 6.4GT/s
650768-L21
HP DL980 G7 Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB/130W) FIO 4-processor Kit
NOTE:
QPI speed is 6.4GT/s
650769-L21
HP DL980 G7 Intel® Xeon® E7-4870 (2.4GHz/10-core/30MB/130W) FIO 4-processor Kit
NOTE:
QPI speed is 6.4GT/s
650770-L21
Eight-Core Processors
HP DL980 G7 Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB/105W) FIO 4-processor Kit
NOTE:
QPI speed is 6.4GT/s
650767-L21
Six-Core Processors
HP DL980 G7 Intel® Xeon® E7-4807 (1.86GHz/6-core/18MB/95W) FIO 4-processor Kit
NOTE:
QPI speed is 4.8GT/s
650766-L21
QuickSpecs
HP ProLiant DL980 Generation 7 (G7)
Configuration Information - Factory Integrated Models
DA - 13708 North America — Version 38 — September 23, 2013
Page 20