HP ProLiant DL60 Gen9, Руководство пользователя

Страница: 61 / 127

Hardware options installation 61
4.
Connect the fan cable to the system board.
5.
Install the air baffle (" Remove the air baffle " on page 19 , on page 20 ).
6.
Install the access panel (on page 19 ).
7.
Do one of the following:
o
Slide the server into the rack.
o Install the server into the rack.
8.
Power up the server (on page 15 ).
FlexibleLOM option
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website ( http://www.hpe.com/info/qs ).
To install the component:
1.
Power down the server (on page 15 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 15 ).
o
Remove the server from the rack (on page 18 ).
4.
Remove the access panel (on page 18 ).
5.
If necessary, disconnect any internal cables connected to the system board.