HP ProLiant DL380 Generation 5, Краткие характеристики

Страница: 31 / 41

Configuration Configuration Configuration Configuration
Bank A Bank A Bank A Bank A
1A and 3A 1A and 3A 1A and 3A 1A and 3A
Bank B Bank B Bank B Bank B
5B and 7B 5B and 7B 5B and 7B 5B and 7B
Bank C Bank C Bank C Bank C
2C and 4C 2C and 4C 2C and 4C 2C and 4C
Bank D Bank D Bank D Bank D
6D and 8D 6D and 8D 6D and 8D 6D and 8D
1 X - - -
2 X X - -
3 X X X -
4 X X X X
Online spare memory configuration Online spare memory configuration Online spare memory configuration Online spare memory configuration
Online spare FBDIMM configuration requirements (in addition to general configuration requirements):
When only bank A is being used, it must be fully populated with dual-rank FBDIMMs.
If banks A and C are being used, they must be fully populated.
If installed, bank A and bank C must contain FBDIMMs with identical part numbers.
If installed, bank B and bank D must also contain FBDIMMs with identical part numbers.
In online spare mode, FBDIMMs must be populated as specified in the following table:
Configuration Configuration Configuration Configuration
Branch 0 Branch 0 Branch 0 Branch 0
Bank A Bank A Bank A Bank A
1A and 3A 1A and 3A 1A and 3A 1A and 3A
Branch 0 Branch 0 Branch 0 Branch 0
Bank C Bank C Bank C Bank C
2C and 4C 2C and 4C 2C and 4C 2C and 4C
Branch 1 Branch 1 Branch 1 Branch 1
Bank B Bank B Bank B Bank B
5B and 7B 5B and 7B 5B and 7B 5B and 7B
Branch 1 Branch 1 Branch 1 Branch 1
Bank D Bank D Bank D Bank D
6D and 8D 6D and 8D 6D and 8D 6D and 8D
1 * X - - -
2 X X - -
3 X X X X
* Configuration 1 is only supported if using bank A, populated with dual-rank FBDIMMs. All FBDIMMs 1GB and above are dual-
rank.
After installing FBDIMMs, use RBSU to configure the system for online spare memory support ("Configuring online spare memory" on
page 57).
Mirrored memory configuration Mirrored memory configuration Mirrored memory configuration Mirrored memory configuration
Mirrored memory FBDIMM configuration requirements (in addition to general configuration requirements):
Banks A and B must be fully populated.
Bank A and bank B must contain FBDIMMs with identical part numbers. If installed, bank C and bank D must also contain
FBDIMMs with identical part numbers.
When using mirrored memory mode, FBDIMMs must be populated as specified in the following table:
Configuration Configuration Configuration Configuration
Bank A Bank A Bank A Bank A
1A and 3A 1A and 3A 1A and 3A 1A and 3A
Bank B Bank B Bank B Bank B
5B and 7B 5B and 7B 5B and 7B 5B and 7B
Bank C Bank C Bank C Bank C
2C and 4C 2C and 4C 2C and 4C 2C and 4C
Bank D Bank D Bank D Bank D
6D and 8D 6D and 8D 6D and 8D 6D and 8D
1 X X - -
2 X X X X
NOTE: NOTE: NOTE: NOTE: After installing FBDIMMs, use RBSU to configure the system for mirrored memory support ("Configuring mirrored memory" on
page 57).
QuickSpecs
HP ProLiant DL380 Generation 5 (G5) HP ProLiant DL380 Generation 5 (G5) HP ProLiant DL380 Generation 5 (G5) HP ProLiant DL380 Generation 5 (G5)
Memory
DA - 12477 North America — Version 63 — September 23, 2010 Page 31