Hardware options installation 58
6.
Remove the PCI riser cage.
Expansion board options
NOTE:
This procedure shows images of the SCSI model server, but it also applies to the SAS model server.
The server supports PCI, PCI-X, and PCI Express expansion boards. PCI hot-plug capability is available on
some expansion slots.
NOTE:
PCI Express applies only to SCSI models.
For instructions on installing a RILOE II board, refer to the
HP Remote Insight Lights-Out Edition II User
Guide
on the Documentation CD.
IMPORTANT:
It is recommended that the optional RILOE II board be installed in slot 1. If you plan to install
a RILOE II board in the future, leave slot 1 unpopulated.
Removing expansion slot cover 1
1.
Power down the server (on page
27
).
2.
Extend or remove the server from the rack ("
Extend the server from the rack
" on page
28
).
3.
Remove the access panel ("
Removing the access panel
" on page
29
).
4.
Remove the PCI riser cage ("
Removing the PCI riser cage
" on page
57
).
CAUTION:
To prevent damage to the server or expansion boards, power down the server and remove all
AC power cords before removing or installing the PCI riser cage.
Содержание ProLiant DL380 Generation 4
Страница 1: ...HP ProLiant DL380 Generation 4 Server User Guide March 2006 5th Edition Part Number 395214 005 ...
Страница 98: ...Troubleshooting 98 ...
Страница 104: ...Troubleshooting 104 ...
Страница 110: ...Regulatory compliance notices 110 Power cord statement for Japan ...
