Removal and replacement procedures 33
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots
have either an expansion slot cover or an expansion board installed.
5.
Remove the expansion slot cover.
To replace the component, reverse the removal procedure.
Expansion board ejector/divider
NOTE:
This component is available only with the optional, hot-plug PCI riser cage.
To remove the component:
1.
Power down the server (on page
20
).
2.
Extend or remove the server from the rack ("
Extend the server from the rack
" on page
19
, "
Remove
the server from the rack
" on page
20
).
3.
Remove the access panel ("
Access panel
" on page
22
).
4.
Remove the PCI riser cage.
CAUTION:
To prevent damage to the server or expansion boards, power down the server and remove all
AC power cords before removing or installing the PCI riser cage.
