System BIOS configuration 26
Figure 22
Remote Access Configuration submenu (2)
Table
18
Configure Remote Access Configuration submenu fields
Field
Description
Options
Serial Port Mode
Set this value to allow you to select 115200 as the baud rate
(transmitted bits per second) of the serial port.
1152008,n
,1
Set this value to allow you to select 57600 as the baud rate
(transmitted bits per second) of the serial port.
57600
8,n,1
Set this value to allow you to select 19200 as the baud rate
(transmitted bits per second) of the serial port.
19200
8,n,1
Default, Set this value to allow you to select 9600 as the baud rate
(transmitted bits per second) of the serial port.
9600 8,n,1
Flow Control
Set this value to not allow Flow control. It’s the default value.
None
Select this value to make Flow control by Hardware.
Hardware
Select this value to make Flow control by Software.
Software
Redirection After BIOS
POST
Set this value to turn off the redirection after post.
Disabled
Set this value to always active the redirection after post. It’s the default
value
Enabled
Terminal Type
VT100 console type in the serial port.
VT100
ANSI console type in the serial port, It’s the default value.
ANSI
VT-UTF8 console type in the serial port.
VT-UTF8
