HP ProLiant DL160 G5P, Руководство по настройке программного обеспечения

Страница: 43 / 64

NOS installation 43
17.
If you have successfully installed the Windows NOS, the Configure Your Server wizard
launches. Close this window to postpone the customization of the server until all of the
installation steps are completed.
18.
You can open the Configure Your Server wizard at any point by clicking Start | Programs
|Administrative Tools | Configure Your Server .
Section3. Completing the installation
Phase 1 - Installing the chipset driver
1.
Insert the Support CD in the server’s optical media drive.
By default, the Support CD automatically runs and displays the Welcome page. However, if this
does not occur, double-click the Startup.htm file located on the root directory of the Support CD.
2.
Click the HP DL160 G5p server drivers for chipset , Network , and Video link.
3.
Select the Server Engines chipset driver option for Windows [NOS version] option.
The File Download dialog box displays.
4.
Click Open to download the driver.
The Security Warning dialog box displays.
5.
Click Yes .
The installation menu for the selected driver is displayed.
6.
Follow the on-screen instructions to install the ServerEngines chipset driver.
7.
After completing the installation, reboot the server.
Phase 2 - Installing the HP network driver
During the Windows NOS installation, the OS may not detect the embedded HP network interface
card. The following procedure helps you install the LAN driver using the Support CD.
1.
Insert the Support CD in the server’s optical media drive. By default, the Support CD
automatically runs and displays the Welcome page. Close this window.
2.
Click Start | Settings | Control Panel | System | Hardware | Device Manager .
3.
Open the Other Devices tree, labeled with a yellow question mark (?), and double-click on the
appropriate Ethernet Controller option to display its menu.
4.
Follow the installation wizard for additional configuration.
5.
Wait for the system to find the appropriate driver, and then click Next .
6.
Click Finish after the LAN driver has loaded.
7.
Close all open windows and restart the server to properly initialize the LAN adapter.
8.
After restarting Windows, configure the network settings for the LAN card to connect to your
network. Verify connectivity.
Phase 3 - Installing the embedded video driver
1.
Insert the Support CD in the server’s optical media drive. By default, the Support CD
automatically runs and displays the Welcome page. However, if this does not occur, double-click
the Startup.htm file located on the root directory of the Support CD.
2.
Click the HP DL160 G5p server drivers for chipset, Network, and Video link.