HP ProLiant DL100 G2 DPSS, Руководство по установке

Страница: 28 / 44

7. On the Internet Options dialog box, click OK to finish.
To connect the storage server to a network using the Remote Browser
method
1. On the remote client machine, open Internet Explorer and
enter
https://
and the serial number of the storage server
followed by a hyphen (-), and then
:3202
. For example,
https://D4059ABC3433-:3202.
Press Enter .
NOTE:
If you are able to determine the IP address from your DHCP
server, you can substitute the IP address for the serial
number and hyphen. For example: 192.100.0.1:3202.
2. Click OK on the Security Alert prompt.
3. Log in to the HP ProLiant Data Protection Storage Server Management
console with the default user name
administrator
and the
password
hpinvent
. The HP ProLiant Data Protection Storage
Server Management Console and the Rapid Startup Wizard start
automatically.
NOTE:
You can change the administrator name and password
when you configure the server using the Rapid Startup
Wizard on page 34.
4. To complete network configuration using the Rapid Startup Wizard,
see Configuring the server on the network on page 31.
IMPORTANT:
If you are using the Remote Browser method to access the HP Data
Protection Storage Server Management console and Rapid Startup
Wizard, always close the remote session before closing your Internet
browser. Closing the Internet browser does not close the remote session.
Failure to close your remote session impacts the limited number of remote
sessions allowed on the storage server at any given time.
Using the Remote Desktop method
To connect the storage server to a network using the Remote Desktop
method
28
Accessing the HP Data Protection Storage Server Management
console