HP ProLiant BL685c G6 Скачать руководство пользователя страница 59

Страница: 59 / 70

Component identification 59

Item Description

Fault/UID LED (amber/blue)

Online LED (green)

SAS and SATA hard drive LED combinations

NOTE:

Predictive failure alerts can occur only when the hard drive is connected to a Smart

Array controller.

Online/activity
LED (green)

Fault/UID LED
(amber/blue)

Interpretation

On, off, or flashing Alternating amber

and blue

The drive has failed, or a predictive failure alert has been
received for this drive; it also has been selected by a

management application.

On, off, or flashing Steadily blue

The drive is operating normally, and it has been selected by a
management application.

On Amber,

flashing

regularly (1 Hz)

A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.

Off

The drive is online, but it is not active currently.

Flashing regularly

(1 Hz)

Amber, flashing

regularly (1 Hz)

Do not remove the drive. Removing a drive may terminate the

current operation and cause data loss.

The drive is part of an array that is undergoing capacity
expansion or stripe migration, but a predictive failure alert has

been received for this drive. To minimize the risk of data loss, do

not replace the drive until the expansion or migration is

complete.

Flashing regularly

(1 Hz)

Off

Do not remove the drive. Removing a drive may terminate the

current operation and cause data loss.

The drive is rebuilding, erasing, or it is part of an array that is

undergoing capacity expansion or stripe migration.

Flashing irregularly Amber, flashing

regularly (1 Hz)

The drive is active, but a predictive failure alert has been

received for this drive. Replace the drive as soon as possible.

Flashing irregularly Off

The drive is active, and it is operating normally.

Off

Steadily amber

A critical fault condition has been identified for this drive, and

the controller has placed it offline. Replace the drive as soon as
possible.

Off Amber,

flashing

regularly (1 Hz)

A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.

Off

The drive is offline, a spare, or not configured as part of an

array.

Содержание ProLiant BL685c G6







































































Результаты поиска

Содержание ProLiant BL685c G6

Отзывы:

Похожие инструкции для ProLiant BL685c G6

Бренды по названию

Популярные бренды

HP ProLiant BL685c G6, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant BL685c G6

Отзывы:

Похожие инструкции для ProLiant BL685c G6

Бренды по названию

Популярные бренды