QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Configuration Information - Factory Integrated Models
c04543743 - DA - 15185 Worldwide - Version 5 - September 28, 2015
Page 16
Network Controller
(2) HP FlexFabric 10Gb 2-port 536FLB FlexibleLOM
Storage Controller
HP Smart ArrayP246br Controller with 1GB FBWC RAID 0,1,5
Hard Drive
None ship standard
Supports up to four (4) HP hot-plug SFF SAS/SATA/SDD drives
Internal Storage
SAS: 8TB; SATA: 8TB; SAS SSD: 7.68TB; SATA SSD: 6.4TB
Optical Drive Bay
None
Expansion Slots
3 standard - Slot 1 supports Type A mezzanine Cards. Slots 2
and 3 support Type A and Type B mezzanine cards.
Management
HP iLO Management (standard)
Optional: HP OneView or HP Insight Control
Form Factor
Up to four (4) full-height blades supported in the HP
BladeSystem c3000 Enclosure
Up to eight (8) full-height blades supported in HP BladeSystem
c7000 Enclosure
Warranty
Server warranty includes 3-year Parts, 3-year Labor, 3-year
on-site support.
NOTE:
This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO server). To
ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE:
Configure-to-order server blades must start with a CTO Server Blade.
NOTE:
FIO indicates that this option is only available as a factory installable option.
NOTE:
All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP ProLiant BL660c Gen9 10/20GB FlexibleLOM Configure-to-Order Server
728352-B21
Configurable Models ship with:
Two (2) FlexibleLOM connectors providing a choice for one or two of the supported
10Gb/20Gb FlexibleLOMs (see Step 2)
Four (4) HP small form factor hot-plug SAS/SATA/ HDD or SSD hard drive bays
Three (3) x16 PCIe I/O expansion slots (one Type A, two Type A/B)
Two (2) integrated USB connector and one (1) MicroSDHC connector
One (1) TPM connector
HP iLO Management (standard)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HP Processors
NOTE:
All configure-to-order processor kits (i.e. xxxxxx-L21) contain two (2)
processors.
NOTE:
If four processors are desired, select one xxxxxx-L21 here in Step 2 and one
xxxxxx-B21 in Step 4.
NOTE: The BL660c Gen9 supports two or four processors; one and three processor
configurations are not supported.
E5-4600 v3 series Processors
HP BL660c Gen9 Intel® Xeon® E5-4610v3 (1.7GHz/10-core/25MB/105W) FIO 2-
728378-L21
