
Chipset
Intel® 7500 chipset
Upgradeability
Upgradeable to two processors
NOTE:
All processors within the server must be identical.
NOTE:
All servers support one or two processors.
NOTE:
The minimum processor configuration is one processor that must be installed in socket CPU1.
NOTE:
If upgrading an existing BL620c G7 server to a different processor, the server's ROM must be
flashed to the latest BIOS prior to the upgrade.
NOTE:
Intel® Xeon® E7-2800/8867L series processors cannot be used to upgrade a ProLiant BL620c G7
server blade with Intel® Xeon® 6500/7500 series processors.
Integrated Manageability
HP Integrated Lights-Out 3 (iLO 3)
Memory
Type
DDR3-1333 and DDR3-1066 Registered DIMMs (RDIMM) (operating up to
1066MHz)
Standard
32GB (4 x 8GB)
Maximum
1.0TB (32 x 32GB RDIMMs)
DDR3 memory options part number decoder
NOTE:
See the "Memory" section for memory guidelines, installation rules, and additional general
information.
Network Controllers
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting 10Gb/1Gb autosensing Ethernet,
FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, and iSCSI boot.
NOTE:
Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric
10Gb/24-port Module or HP 10GbE Pass-Thru Module.
NOTE:
The Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module or
HP 10GbE Pass-Thru Module.
One (1) 10/100 network adapter port dedicated to iLO 3 Management
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Standard Features
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 3