
HP Processors
NOTE:
The BL620c G7 supports one or two processors.
NOTE:
The minimum processor configuration is one processor that must be installed in
socket CPU1.
NOTE:
All processors within the server must be identical.
NOTE:
All -B21 processor kits listed below contain one (1) processor.
NOTE:
If upgrading an existing BL620c G7 server to a different processor, the server's
ROM must be flashed to the latest BIOS prior to the upgrade.
NOTE:
Intel® Xeon® E7-2800/8867L series processors cannot be used to upgrade a
ProLiant BL620c G7 server blade with Intel® Xeon® 6500/7500 series processors.
Ten-Core Processors
HP BL620c G7 Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB/130W) Processor Kit
643749-B21
HP BL620c G7 Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB/130W) Processor Kit
643751-B21
HP BL620c G7 Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB/130W) Processor Kit
643753-B21
HP BL620c G7 Intel® Xeon® E7-8867L (2.13GHz/10-core/30MB/105W) Processor Kit
643761-B21
Eight-Core Processors
HP BL620c G7 Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB/105W) Processor Kit
643755-B21
HP BL620c G7 Intel® Xeon® E7-2820 (2.0GHz/8-core/18MB/105W) Processor Kit
643757-B21
Six-Core Processors
HP BL620c G7 Intel® Xeon® E7-2803 (1.73GHz/6-core/18MB/105W) Processor Kit
643759-B21
HP Memory
NOTE:
All DDR3 memory option kits consist of one RDIMM per kit.
NOTE:
See the "Memory" section for memory guidelines, installation rules, and
additional general information.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
500658-B21
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
500662-B21
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power
Memory Kit
604506-B21
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP
Memory Kit
627812-B21
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit
500666-B21
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP Memory
Kit
627814-B21
HP Hard Drives
NOTE:
The components of a storage subsystem (e.g. the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE:
Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE:
Two drives are required for RAID 0 and 1.
NOTE:
SAS, SATA, and/or SSD drives cannot be mixed within the server.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Core Options
DA - 13747 Worldwide — Version 35 — December 13, 2013
Page 19