![background image](http://html.mh-extra.com/html/hp/proliant-bl465c-gen8/proliant-bl465c-gen8_maintenance-and-service-manual_164613056.webp)
Removal and replacement procedures 56
11.
Press the
F10
key to confirm exiting RBSU. The server blade automatically reboots.
Server blade release lever assembly
To remove the component:
1.
Power down the server blade (on page
2.
Remove the server blade (on page
3.
Remove the access panel ("
" on page
4.
Remove all hard drives ("
" on page
CAUTION:
Always disconnect the drive cables from the SAS controller before removing the
DIMM baffle. Failure to do so may result in damage to the SAS controller.
5.
Disconnect the drive cables from the SAS controller and remove the DIMM baffle ("
" on
6.
Remove all DIMMs ("
" on page
7.
If a capacitor pack is installed and connected to a mezzanine option, disconnect the cable from the
mezzanine option and remove the capacitor pack ("
Removing the mezzanine option capacitor pack
8.
Remove the heatsink blank, if installed ("
" on page
9.
Remove the front panel/drive cage assembly ("
Front panel/drive cage assembly
" on page
10.
While holding the system board in place, turn the base pan on its side and remove the four system
board screws from the bottom of the base pan.
11.
Place the server blade on a flat, level work surface.
Содержание ProLiant BL465c Gen8
Страница 12: ...Customer self repair 12 ...
Страница 13: ...Customer self repair 13 ...
Страница 14: ...Customer self repair 14 ...
Страница 20: ...Illustrated parts catalog 20 ...