HP ProLiant BL460c Gen8 Скачать руководство пользователя

Страница: 7 / 84

Component identification 7

Item Description

Status

Health status LED

bar

Solid Green = Normal (System is powered on)

Flashing Green = Power On/Standby Button service is being initialized
Flashing Amber = Degraded condition
Flashing Red = Critical condition

Off = Normal (System is in standby)

System power LED Solid Green = System is powered on.

Flashing Green = System is waiting to power on; Power On/Standby button is

pressed.
Solid Amber = System is in standby; Power On/Standby Button service is
initialized.

Off and the Health Status LED bar is off = The system has no power.
Off and the Health Status LED bar is flashing green = The Power On/Standby
Button service is being initialized.

UID LED

Solid Blue = Identified
Flashing Blue = Active remote management
Off = No active remote management

FlexLOM LED

Green = Network linked
Flashing Green = Network activity

Off = No link or activity

Drive LED definitions

Item LED

Status

Definition

Locate

Solid blue

The drive is being identified by a host application.

Flashing blue

The drive carrier firmware is being updated or requires an update.

Activity ring

Rotating green

Drive activity

Off

No drive activity

Do not remove

Solid white

Do not remove the drive. Removing the drive causes one or more of
the logical drives to fail.

Off

Removing the drive does not cause a logical drive to fail.

Drive status

Solid green

The drive is a member of one or more logical drives.

Flashing green

The drive is rebuilding or performing a RAID migration, stripe size

migration, capacity expansion, or logical drive extension, or is
erasing.

Flashing

amber/green

The drive is a member of one or more logical drives and predicts

the drive will fail.

Flashing amber The drive is not configured and predicts the drive will fail.

Содержание ProLiant BL460c Gen8





















































































Результаты поиска

Содержание ProLiant BL460c Gen8

Отзывы:

Похожие инструкции для ProLiant BL460c Gen8

Бренды по названию

Популярные бренды

HP ProLiant BL460c Gen8, Руководство пользователя

Результаты поиска

Содержание ProLiant BL460c Gen8

Отзывы:

Похожие инструкции для ProLiant BL460c Gen8

Бренды по названию

Популярные бренды