HP ProLiant BL460c Gen8, Руководство пользователя

Страница: 39 / 84

Hardware options installation 39
o
Route the cable along the right DIMM baffle and connect the cable to the SAS controller.
o
Route the cable along the left DIMM baffle and connect the cable to the mezzanine option.
6.
Install the access panel (on page 14 ).
7.
Install the server blade (" Installing a server blade " on page 21 ).
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server blade. This procedure includes three
sections:
1.
Installing the Trusted Platform Module board (on page 40 ).
2.
Retaining the recovery key/password (on page 41 ).
3.
Enabling the Trusted Platform Module (on page 42 ).
Enabling the TPM requires accessing RBSU (" HP ROM-Based Setup Utility " on page 52 ). For more
information about RBSU, see the HP website TPM installation requires the use of drive encryption technology, such as the Microsoft Windows BitLocker
Drive Encryption feature. For more information on BitLocker, see the Microsoft website
CAUTION: Always observe the guidelines in this document. Failure to follow these guidelines
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines: