NOTE:
The Intel Xeon E5-2600 Processor Family cannot be configured with the new
1866MHz HP Smart Memory or the new 1600MHz Low Voltage (1.35v) HP Smart
Memory.
NOTE:
DIMM slots 4 and 5 are not accessible when either the E5-2690, the E5-2643, the
E5-2643 v2, the E5-2637 v2, or the E5-2667 v2 is used. In a 2 processor configuration,
there are twelve (12) total available DIMM slots.
NOTE:
For the maximum supported memory speeds for each processor listed above,
please reference the 'Memory Speed by Processor Model' table in the Memory section
of the QuickSpecs.
NOTE:
HT indicates that the processor model supports Intel® Hyper-Threading
Technology.
NOTE:
Turbo indicates the maximum potential frequency increment when using Intel®
Turbo Boost Technology, with 8, 7, 6, 5, 4, 3, 2 or 1 core(s) active.
NOTE:
DDR3 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE:
Up to 2 processors supported. Mixing different processor models is not
supported.
NOTE:
For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model
number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6
is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE:
The BL460c Gen8 supports one or two processors.
NOTE:
The BL460c Gen8 includes two I/O mezzanine expansion slots. A processor must
be installed in processor slot 1 for access to the first mezzanine expansion slot
(expansion slot 1). A processor must be installed in processor slot 2 for access to the
second mezzanine expansion slot (expansion slot 2).
NOTE:
All processors within the server must be identical.
NOTE:
All processors support Intel® Hyper-Threading and Intel® Turbo Boost
Technologies except the E5-2603 and E5-2609.
NOTE:
The letter "L" following the model number indicates denotes lower wattage.
NOTE:
The processor model as well as the memory configuration determines the
maximum speed memory can operate. Please see the see the "Memory" section later in
this document.
NOTE:
The Intel Xeon E5-2620 processor does not support DIMMs at 1.35V. Using the
HP RBSU, 1.35V DIMMs can be changed to operate at 1.5V.
NOTE:
When HP 24GB (1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered
CAS-9 Low Voltage FIO Memory Kits are used with any processors except the E5-2690,
the E5-2643, the E5-2637 v2, the E5-2643 v2, or the E5-2667 v2 all 16 DIMM slots on
the BL460c Gen8 must be fully populated with these 24GB DIMMs. When HP 24GB
(1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO
Memory Kits are used with either the E5-2690, the E5-2643, the E5-2637 v2, the E5-
2643 v2, or the E5-2667 v2, all 12 available DIMM slots on the BL460c Gen8 must be
fully populated with these 24GB DIMMs.
HP Memory
NOTE:
The HP ProLiant BL460c Gen8 10Gb FlexibleLOM Configure-to-order Blade
Server (641016-B21) cannot be configured the new 1866MHz HP Smart Memory or the
new 1600MHz Low Voltage (1.35v) HP Smart Memory.
NOTE:
HP memory from previous generation servers are not qualified or warranted
with this HP ProLiant BL460c Server. HP SmartMemory is required to realize the
memory performance improvements and enhanced functionality listed in this
document for Gen8. For additional information, please see the HP SmartMemory
QuickSpecs at:
QuickSpecs
HP ProLiant BL460c Generation 8 (Gen8) Server Blade
Configuration Information - Factory Integrated Models
DA - 14208 North America — Version 31 — December 13, 2013
Page 34
