Figure 11 Manage Disks page—configurable storage server
Table 5 Manage Disks options
Option
Task
Rescan
Detects a new disk added to the system. By default, drives are
dynamically recognized by the system. Occasionally a rescan of
the hardware is required. The rescan is not synchronous and may
require a browser refresh after the scan is initiated to display the
new content.
Initialize Disk*
Initializes any empty disk to type basic.
Disk Erase*
Erases the selected disk.
Convert Disk*
Converts the selected disk from basic to dynamic, or dynamic to
basic.
Create New Volume
Select to create a new volume.
Properties
Select to display the properties of the selected disk.
Advanced Disk Management
Select to open the Disk Management utility and perform advanced
disk management tasks. Please see the online Disk Management
help pages for complete documentation.
* These tasks cannot be completed on clustered resources.
Creating a new volume via the WebUI
To create a new volume via the WebUI:
1.
Click the
Disks
tab, and then click
Disks
.
2.
Select the Disk on which to create the new volume.
3.
Click
Create New Volume
.
38
Disk and Volume Management
Содержание ProLiant 300 Series
