manualshive.com logo in svg

HP ProDesk 400 G4, Справочник по аппаратуре

Поделиться
Скачать
HP ProDesk 400 G4 Скачать руководство пользователя страница 34

Removing and replacing a hard drive

NOTE:

Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you 

can transfer the data to the new hard drive.

1.

Remove/disengage any security devices that prohibit opening the computer.

2.

Remove all removable media, such as compact discs or USB flash drives, from the computer.

3.

Turn off the computer properly through the operating system, then turn off any external devices.

4.

Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION:

Regardless of the power-on state, voltage is always present on the system board as long as 

the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to 

the internal components of the computer.

5.

Remove the computer access panel. See 

Removing the computer access panel on page 5

.

6.

Disconnect the power cable (1) and data cable (2) from the rear of the optical drive.

7.

Press the release lever on the back of the drive (1), and then slide the drive through the front bezel (2).

26

Chapter 2   Hardware upgrades

Содержание ProDesk 400 G4






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды