manualshive.com logo in svg

HP ProDesk 400 G4, Справочник по аппаратуре

Поделиться
Скачать
HP ProDesk 400 G4 Скачать руководство пользователя страница 15

Removing the front bezel

1.

Remove/disengage any security devices that prohibit opening the computer.

2.

Remove all removable media, such as compact discs or USB flash drives, from the computer.

3.

Turn off the computer properly through the operating system, then turn off any external devices.

4.

Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION:

Regardless of the power-on state, voltage is always present on the system board as long as 

the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to 

the internal components of the computer.

5.

Remove the computer access panel. See 

Removing the computer access panel on page 5

.

6.

Lift up the four tabs on the top side of the bezel (1), and then rotate the bezel off the chassis (2).

NOTE:

You may need a tool to pry up the three bezel tabs, or you can remove the hard drive cage to 

make the tabs easier to access.

Removing the front bezel

7

Содержание ProDesk 400 G4






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды