manualshive.com logo in svg

HP ProDesk 400 G3 Small Form Factor, Руководство по техническому обслуживанию и ремонту

HP ProDesk 400 G3 Small Form Factor - компактный и мощный компьютер для офисного использования. Чтобы узнать подробности по техническому обслуживанию и ремонту, можно бесплатно скачать Руководство по техническому обслуживанию на {сайт}. Необходимая информация всегда под рукой.

Поделиться
Скачать
background image

Table 5-3

  Computer Setup—Advanced (for advanced users) (continued)

●

Legacy Boot Order

Specify the order in which legacy boot sources (such as a network interface card, internal hard drive, 
USB optical drive, or internal optical drive) are checked for a bootable operating system image.

Specify the order of attached hard drives. The first hard drive in the order will have priority in the 
boot sequence and will be recognized as drive C (if any devices are attached).

NOTE:

To drag a device to a preferred place, press 

Enter

.

NOTE:

MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system has 

started.

Shortcut to Temporarily Override Boot Order

To boot one time from a device other than the default device specified in Boot Order, restart the computer 
and press 

Esc

 (to access the Startup menu) and then 

F9

 (Boot Menu), or only 

F9

 (skipping the Startup 

menu) when the monitor light turns green. After POST is completed, a list of bootable devices is displayed. 
Use the arrow keys to select the preferred bootable device and press 

Enter

. The computer then boots 

from the selected non-default device for this one time.

Secure Boot 
Configuration

Configure Legacy Support and Secure Boot

Legacy Support – Lets you turn off all legacy support on the computer, including booting to DOS, running 
legacy graphics cards, booting to legacy devices, and so on. Windows 7 for instance requires legacy 
support, whereas Windows 8 does not.

Secure Boot – Lets you make sure an operating system is legitimate before booting to it, making Windows 
resistant to malicious modification from preboot to full OS booting, preventing firmware attacks. UEFI and 
Windows Secure Boot only allow code signed by pre-approved digital certificates to run during the 
firmware and OS boot process.

Default is ‘Legacy Support Enable and Secure Boot Disable’ for Windows 7 and other non-Windows 
configurations. Default is ‘Legacy Support Disable and Secure Boot Enable’ for Windows 8.1 and later 
configurations.

Secure Boot Key Management

Lets you manage the custom key settings.

Clear Secure Boot Keys

Lets you delete any previously loaded custom boot keys. Clearing keys will disable secure boot. Default is 
disabled.

Reset Secure Boot keys to factory defaults

Default is disabled.

Enable MS UEFI CA key

Disabling this setting alters the Secure Boot key list to further restrict the allowed software 
components. Set this option to ‘disable’ to support Device Guard.

System Options

Configure Storage Controller for RAID (enable/disable)

Lets you enable onboard RAID. Default is disabled.

POST Prompt for RAID Configuration (Intel only)

When disabled, the prompt for ‘RAID option ROM’ in legacy mode is suppressed.

SVM CPU Virtualization (AMD only)

Controls the virtualization features of the processor. Changing this setting requires turning the computer 
off and then back on. Default is disabled.

Virtualization Technology (VTx) (Intel only)

Controls the virtualization features of the processor. Changing this setting requires turning the computer 
off and then back on. Default is disabled.

Computer Setup (F10) Utilities

55

Содержание ProDesk 400 G3 Small Form Factor




































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProDesk 400 G3 Small Form Factor

IEI Technology HTB-100-HM170 User Manual preview
HTB-100-HM170
Бренд: IEI Technology Страницы: 131
iFixit Mac Mini Model A1347 Teardown Manual preview
Mac Mini Model A1347
Бренд: iFixit Страницы: 13
Energy Star Xi3 NUC Lear Instruction Manual preview
Xi3 NUC Lear
Бренд: Energy Star Страницы: 17
Altair 8800 Clone Operator'S Manual preview
8800 Clone
Бренд: Altair Страницы: 35
Dell OptiPlex 170L Specifications preview
OptiPlex 170L
Бренд: Dell Страницы: 2
Dell Inspiron 22 3000 SERIES Service Manual preview
Inspiron 22 3000 SERIES
Бренд: Dell Страницы: 130
Scheppach 5907103900 Manual preview
5907103900
Бренд: Scheppach Страницы: 56
Compaq Compaq Evo D310 MT Hardware Reference Manual preview
Compaq Evo D310 MT
Бренд: Compaq Страницы: 57
Germfree BZ Series User Manual preview
BZ Series
Бренд: Germfree Страницы: 53
Shuttle XPC SK21G User Manual preview
XPC SK21G
Бренд: Shuttle Страницы: 72
honor BXP-320 Quick Start Manual preview
BXP-320
Бренд: honor Страницы: 2
Fujitsu Siemens Computers Edition X103 SFF Operating Manual preview
Edition X103 SFF
Бренд: Fujitsu Siemens Computers Страницы: 49
Fujitsu Siemens Computers SCENIC T Operating Manual preview
SCENIC T
Бренд: Fujitsu Siemens Computers Страницы: 64
Fujitsu Siemens Computers SCENIC Edition X100 Operating Manual preview
SCENIC Edition X100
Бренд: Fujitsu Siemens Computers Страницы: 65
Shuttle NS02A Quick Start Manual preview
NS02A
Бренд: Shuttle Страницы: 2
C&T Solution BCO-1000 User Manual preview
BCO-1000
Бренд: C&T Solution Страницы: 69
Faytech FT07N4200CAPOB Manual preview
FT07N4200CAPOB
Бренд: Faytech Страницы: 2
Advantage ARK-6322 User Manual preview
ARK-6322
Бренд: Advantage Страницы: 57

Бренды по названию

Популярные бренды

Загрузить еще бренды