manualshive.com logo in svg

HP ProDesk 400 G3 Small Form Factor, Руководство по техническому обслуживанию и ремонту

HP ProDesk 400 G3 Small Form Factor - компактный и мощный компьютер для офисного использования. Чтобы узнать подробности по техническому обслуживанию и ремонту, можно бесплатно скачать Руководство по техническому обслуживанию на {сайт}. Необходимая информация всегда под рукой.

Поделиться
Скачать
background image

1.

Close all open programs.

2.

Click the Start button, right-click Computer, and then click Properties.

3.

Click System protection, System Restore, click Next, and then follow the on-screen instructions.

System Recovery

WARNING!

This procedure will delete all user information. To prevent loss of information, be sure to back up 

all user information so you can restore it after recovery.

System Recovery completely erases and reformats the hard disk drive, deleting all data files that you have 
created, and then reinstalls the operating system, programs, and drivers. However, you must reinstall any 
software that was not installed on the computer at the factory. This includes software that came on media 
included in the computer accessory box, and any software programs you installed after purchase. Any 
personal files must be restored from backups you made.

If you were not able to create system recovery DVDs or USB flash drive, you can order a recovery disc set from 
support. Go to 

http://www.hp.com/support

, select your country or region, and follow the on-screen 

instructions.

NOTE:

Always use the System Restore procedure before you use the System Recovery program. See 

System 

Restore on page 109

.

You must choose one of the following methods to perform a System Recovery:

●

Recovery image — Run System Recovery from a recovery image stored on your hard disk drive. The 
recovery image is a file that contains a copy of the original factory-shipped software. To perform a 
System Recovery from a recovery image, see 

System Recovery when Windows is responding 

on page 110

 or 

System Recovery when Windows is not responding on page 111

.

●

Recovery media — Run System Recovery from recovery media that you have created from files stored 
on your hard disk drive or purchased separately. See 

System Recovery using recovery media (select 

models only) on page 111

.

System Recovery when Windows is responding

CAUTION:

System Recovery deletes all data and programs you created or installed. Before you begin, back 

up any important data to a CD or DVD or to a USB flash drive.

NOTE:

In some cases, you must use recovery media for this procedure. If you have not already created this 

media, follow the instructions in 

Creating recovery media on page 107

.

If the computer is working and Windows 7 is responding, use these steps to perform a System Recovery:

1.

Turn off the computer.

2.

Disconnect all peripheral devices from the computer except the monitor, keyboard, and mouse.

3.

Turn on the computer.

4.

When Windows has loaded, click the Start button, and then click All Programs.

●

If Security and Protection is listed, continue with step 

5

.

●

If Productivity and Tools is listed, follow the steps in 

System Recovery when Windows is not 

responding on page 111

.

5.

Click Security and Protection, click Recovery Manager, and then click Recovery Manager. If prompted, 
click Yes to allow the program to continue.

110 Chapter 10   System backup and recovery

Содержание ProDesk 400 G3 Small Form Factor




































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProDesk 400 G3 Small Form Factor

IBM 5100 Communications Manual preview
5100
Бренд: IBM Страницы: 54
IBM 5100 Maintenance Information preview
5100
Бренд: IBM Страницы: 388
EUROCOM LP200ST User Manual preview
LP200ST
Бренд: EUROCOM Страницы: 113
CyberResearch CYRAQ PPC Series User Manual preview
CYRAQ PPC Series
Бренд: CyberResearch Страницы: 103
IEI Technology FLEX-BX100-ULT5 User Manual preview
FLEX-BX100-ULT5
Бренд: IEI Technology Страницы: 121
Rockler Adjustable Height Workstation Assembly Instructions Manual preview
Adjustable Height Workstation
Бренд: Rockler Страницы: 8
Walfront JDSW43R Installation Manual preview
JDSW43R
Бренд: Walfront Страницы: 39
Uplift Desk UDA118 Instructions preview
UDA118
Бренд: Uplift Desk Страницы: 2
Dell Precision PP04X Quick Reference Manual preview
Precision PP04X
Бренд: Dell Страницы: 104
Dell Precision PD055 Quick Reference Manual preview
Precision PD055
Бренд: Dell Страницы: 142
Dell Precision M4300 Quick Reference Manual preview
Precision M4300
Бренд: Dell Страницы: 246
Dell Precision PD050 Quick Reference Manual preview
Precision PD050
Бренд: Dell Страницы: 360
Dell Precision R5400 Service Manual preview
Precision R5400
Бренд: Dell Страницы: 64
Dell Precision R5400 Specifications preview
Precision R5400
Бренд: Dell Страницы: 2
Dell Precision R3961 Quick Reference Manual preview
Precision R3961
Бренд: Dell Страницы: 122
Dell Precision P8189 Quick Reference Manual preview
Precision P8189
Бренд: Dell Страницы: 136
Dell Precision NX046 User Manual preview
Precision NX046
Бренд: Dell Страницы: 316
Dell INSPIRON Inspiron 5000 Reference And Troubleshooting Manual preview
INSPIRON Inspiron 5000
Бренд: Dell Страницы: 132

Бренды по названию

Популярные бренды

Загрузить еще бренды