background image

16

5 GHz Operation:

"This device requires the user to properly enter the current country of operation during the initial setup 
of the Radio Port.  Once the country of operation has been entered, the Radio Port will automatically limit 
the available channels, ensuring compliant operation in the selected country.  Incorrectly entering the 
country of operation may result in illegal operation and may cause harmful interference to other systems.  
The user is obligated to ensure the device is operating according to the channel limitations, indoor/
outdoor restrictions and license requirements for each European Community country as described in this 
document. Information on configuring this device can be found in the ProCurve 5300xl Module Installation 
Guide. 

"This device employs a radar detection feature required for European Community and EFTA country 
operation in the 5GHz band.  This feature is automatically enabled when the country of operation is 
correctly configured for any European Community or EFTA country.  The presence of nearby radar operation 
may result in temporary interruption of operation of this device.  The radar detection feature will 
automatically restart operation on a channel free of radar.

"This device is restricted to indoor use when operated in EU and EFTA countries using the 5.15-5.35GHz 
band (Channels 36, 40, 44, 48, 52, 56, 60 and 64).  See the table below for the allowed 5GHz channels 
in each band. 

Operation Using 5 GHz Channels in the European Community

The user must ensure operation of this device is in conformance with European National spectrum usage laws as 
shown below and elsewhere in this document

.

Frequency Band 

(MHz)

Allowed Channels

Usage

Maximum EIRP 

(mW)

Maximum EIRP 

(dBm)

5150-5250

36,40,44,48

Indoor Use only

200

23

5250-5350

52,56,60,64

Indoor Use only

200

23

5470-5725

100, 104, 108, 112, 116, 120, 124, 128, 132, 

136, 140

Indoor or outdoor 

use

1000

30

Содержание ProCurve Radio Port 210

























Отзывы: