HP ProCurve 6108, Руководство по управлению и настройке

Страница: 429 / 547

-----------
IP Routing Features
Configuring IRDP
[ minadvertinterval <
seconds
> ]
This parameter specifies the minimum amount of time the
routing switch can wait between sending Router
Advertisements.
Default: three-fourths (0.75) the value of the
maxadvertinterval parameter.
If you change the
maxadvertinterval
parameter, the software
automatically adjusts the minadvertinterval parameter to be
three-fourths the new value of the
maxadvertinterval
parameter. If you want to override the automatically
configured value, you can specify an interval from 1 to the
current value of the
maxadvertinterval
parameter.
[preference <
number
>]
This parameter specifies the IRDP preference level of this
routing switch. If a host receives Router Advertisements from
multiple routers, the host selects the router interface that sent
the message with the highest preference as the host's default
gateway. The valid range is -4294967296 to 4294967295.
Default: 0 .
Displaying IRDP Information
To display IRDP information, enter the following command from any CLI level:
HPswitch# show ip irdp
Status and Counters - ICMP Router Discovery Protocol
Globa l Status : Disabled
VLAN Name
Status Adver tising Min int Max int Holdtime Preference
Add ress (sec) (sec) (sec)
----- --------- -------- ------------ ------- ------- --------
DEFAU LT_VLAN Enable d multicast
450 600 1800 0
VLAN2 0 Enable d multicast 450 600 1800 0
VLAN3 0 Enable d multicast 450 600 1800 0
Figure 16-3. Example of Displaying IRDP Information
16-21