manualshive.com logo in svg

HP ProBook 4445s, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ProBook 4445s Скачать руководство пользователя страница 118

To recover the original hard drive image using 

f11

:

1.

If possible, back up all personal files.

2.

If possible, check for the presence of the HP Recovery partition: From the Start screen, type 

C

,

and then select 

Computer

.

NOTE:

If the HP Recovery partition is not listed, you must recover your operating system and

programs using the Windows 8 operating system media and the 

Driver Recovery

 media (both

purchased separately). For additional information, see 

Using Windows 8 operating system

media (purchased separately) on page 110

.

3.

If the HP Recovery partition is listed, restart the computer, and then press 

esc

 while the “Press

the ESC key for Startup Menu” message is displayed at the bottom of the screen.

4.

Press 

f11

 while the “Press <F11> for recovery” message is displayed on the screen.

5.

Follow the on-screen instructions.

Using Windows 8 operating system media (purchased separately)

To order a Windows 8 operating system DVD, go to 

http://www.hp.com/support

, select your country

or region, and follow the on-screen instructions. You can also order the DVD by calling support. For
contact information, see the 

Worldwide Telephone Numbers

 booklet included with the computer.

CAUTION:

Using a Windows 8 operating system media completely erases hard drive contents and

reformats the hard drive. All files that you have created and any software that you have installed on
the computer are permanently removed. When reformatting is complete, the recovery process helps
you restore the operating system, as well as drivers, software, and utilities.

To initiate recovery using a Windows 8 operating system DVD:

NOTE:

This process takes several minutes.

1.

If possible, back up all personal files.

2.

Restart the computer, and then insert the Windows 8 operating system DVD into the optical
drive before the Windows operating system loads.

3.

When prompted, press any keyboard key.

4.

Follow the on-screen instructions.

After the repair is completed:

1.

Eject the Windows 8 operating system media and then insert the 

Driver Recovery

 media.

2.

Install the Hardware Enabling Drivers first, and then install Recommended Applications.

Using Windows Refresh for quick and easy recovery

When your computer is not working properly and you need to regain system stability, the Windows
Refresh option allows you to start fresh and keep what is important to you.

IMPORTANT:

Refresh removes any traditional applications that were not originally installed on the

system at the factory.

NOTE:

During Refresh, a list of removed traditional applications will be saved so that you have a

quick way to see what you might need to reinstall. See Help and Support for instructions on
reinstalling traditional applications. From the Start screen, type 

h

, and then select 

Help and Support

.

110 Chapter 7   Backup and recovery

Содержание ProBook 4445s









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды