manualshive.com logo in svg

HP Pro 3410, Руководство по техническому обслуживанию и ремонту

HP Pro 3410 - Устройство, созданное для эффективной работы. Для правильного обслуживания и ухода за ним необходимо скачать бесплатное руководство по обслуживанию и сервису с нашего сайта. Получите доступ к этому руководству на manualshive.com и научитесь ухаживать за своим устройством правильно.

Поделиться
Скачать
background image

Computer Setup—Power

NOTE:

Support for specific Computer Setup options may vary depending on the hardware

configuration.

Table 3-5

  Computer Setup—Power

Option

Description

Hardware Power
Management

SATA Power Management – Enables or disables SATA bus and/or device power management.
Default is enabled.

S5 Maximum Power Savings – Turns off power to all nonessential hardware when system is off to
meet EUP Lot 6 requirement of less than 1 Watt power usage. Default is enabled.

S5 Wake on LAN (enable/disable).

●

To disable Wake on LAN during the off state (S5), use the arrow (left and right) keys to
select the Advanced > Device Options menu and set the S5 Wake on LAN feature to
Disable. This obtains the lowest power consumption available on the computer during S5. It
does not affect the ability of the computer to Wake on LAN from suspend or hibernation, but
will prevent it from waking from S5 via the network. It does not affect operation of the
network connection while the computer is on.

●

If a network connection is not required, completely disable the network controller (NIC) by
using the arrow (left and right) keys to select the Security > Device Security menu. Set the
Network Controller option to Device Hidden. This prevents the network controller from being
used by the operating system and reduces the power used by the computer in S5.

Thermal

CPU Fan Speed (view only) – Lets you view fan speed.

System Fan Speed (view only) – Lets you view fan speed.

Computer Setup (F10) Utilities

15

Содержание Pro 3410










































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Pro 3410

Texas Instruments Derive 5 Introduction Manual preview
Derive 5
Бренд: Texas Instruments Страницы: 58
Texas Instruments LearningCheck Creator Reference Manual preview
LearningCheck Creator
Бренд: Texas Instruments Страницы: 81
Autodesk AUTOCAD MAP 3D Brochure preview
AUTOCAD MAP 3D
Бренд: Autodesk Страницы: 4
FARONICS DEEP FREEZE ENTERPRISE 6 Manual preview
DEEP FREEZE ENTERPRISE 6
Бренд: FARONICS Страницы: 64
Quantum PX500 Series Quick Start Manual preview
PX500 Series
Бренд: Quantum Страницы: 6
Fellowes MediaFACE 4.01 User Manual preview
MediaFACE 4.01
Бренд: Fellowes Страницы: 170
Samsung G3 Station HX-DU010EC Specifications preview
G3 Station HX-DU010EC
Бренд: Samsung Страницы: 1
Samsung HX-MT010EA User Manual preview
HX-MT010EA
Бренд: Samsung Страницы: 25
Samsung ANYCAM SNC-35E User Manual preview
ANYCAM SNC-35E
Бренд: Samsung Страницы: 9
Samsung G2 PORTABLE HX-MU050DC (Korean) User Manual preview
G2 PORTABLE HX-MU050DC
Бренд: Samsung Страницы: 38
Samsung Auto Backup User Manual preview
Auto Backup
Бренд: Samsung Страницы: 80
Samsung G3 Station HX-DU010EC (Korean) User Manual preview
G3 Station HX-DU010EC
Бренд: Samsung Страницы: 37
Samsung G2 PORTABLE HX-MU025DC (Korean) User Manual preview
G2 PORTABLE HX-MU025DC
Бренд: Samsung Страницы: 36
IBM Netcool/OMNIbus Probe for Nortel CNM Reference Manual preview
Netcool/OMNIbus Probe for Nortel CNM
Бренд: IBM Страницы: 34
Avermedia AVerIR Setup Manual preview
AVerIR
Бренд: Avermedia Страницы: 5
AVG ANTI-VIRUS 2011 - REV 2011.10 User Manual preview
ANTI-VIRUS 2011 - REV 2011.10
Бренд: AVG Страницы: 209
AVG ANTI-VIRUS 2011 - REV 2011.09 User Manual preview
ANTI-VIRUS 2011 - REV 2011.09
Бренд: AVG Страницы: 209
AVG ANTI-VIRUS 9 User Manual preview
ANTI-VIRUS 9
Бренд: AVG Страницы: 216

Бренды по названию

Популярные бренды

Загрузить еще бренды