HP PRINTER SERIES D2600 Скачать руководство пользователя страница 53

Страница: 53 / 76

Is the I/O module fault LED amber?

Possible Solutions

Possible Reasons

Answer

No action required.

Functioning properly.

•

Make sure that the I/O module
is seated properly by pressing
the I/O module firmly into its
bay after the handle has clicked
in place.

CAUTION:

Never remove an I/O
module from the chassis
while the status LED is
green. Removing an
active I/O module can
result in data loss.

•

Contact an authorized service
provider for assistance.

•

The I/O module is locked.

•

The I/O module has failed.

•

Other fault condition exists.

Yes

Is the fan LED amber?

Actions

Possible Reasons

Answers

No action required

Functioning properly.

•

Be sure that the fan is undam-
aged and is fully seated.

•

Contact an authorized service
provider for assistance.

Fan might not be inserted properly,
might have a damaged connector,
or might have failed.

Yes

D2600/D2700 Disk Enclosure User Guide

Содержание PRINTER SERIES D2600













































































Результаты поиска

Содержание PRINTER SERIES D2600

Отзывы:

Похожие инструкции для PRINTER SERIES D2600

Бренды по названию

Популярные бренды

HP PRINTER SERIES D2600, Руководство пользователя

Результаты поиска

Содержание PRINTER SERIES D2600

Отзывы:

Похожие инструкции для PRINTER SERIES D2600

Бренды по названию

Популярные бренды