HP PRINTER SERIES D2600 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 76

background image

Unit identification (UID) button

The unit identification (UID) button helps locate an enclosure and its components. When the UID button
is activated, the UID on the front and rear of the enclosure are illuminated.

NOTE:

A remote session from the management utility can also illuminate the UID.

•

To turn on the UID light,

press the UID button. The UID light on the front and the rear of the enclosure

will illuminate solid blue. (The UID on cascaded storage enclosures are not illuminated.)

•

To turn off an illuminated UID light,

press the UID button. The UID light on the front and the rear

of the enclosure will turn off.

Power on/standby button

The power on/standby button applies either full or partial power to the enclosure chassis.

•

To initially power on the enclosure,

press and hold the on/standby button for a few seconds, until

the LEDs begin to illuminate.

•

To place an enclosure in standby,

press and hold the on standby button for a few seconds, until

the on/standby LED changes to amber.

NOTE:

System power to the disk enclosure does not completely shut off with the power on/standby button.
The standby position removes power from most of the electronics and components, but portions of
the power supply and some internal circuitry remain active. To completely remove power from the
system, disconnect all power cords from the device.

SAS cables

These disk enclosures use cables with mini-SAS connectors for connections to the host and to additional
cascaded disk enclosures.

Use supported SAS cables with mini-SAS connectors. A variety of SAS cables and cable lengths are
supported for use with this disk enclosure. For more information, see the QuickSpecs for the disk
enclosure, available on the D2000 website:

http://www.hp.com/go/D2000

.

D2600/D2700 Disk Enclosure User Guide

17

«
...
15
16
17
18
19
...
»

Содержание PRINTER SERIES D2600













































































Отзывы:

Нет отзывов

Похожие инструкции для PRINTER SERIES D2600

NetXtend Flex 20

Бренд: Vertiv Страницы: 188

EC-3US25 SuperSpeed

Бренд: Sabrent Страницы: 2

Бренд: StarTech.com Страницы: 11

Бренд: Aerocool Страницы: 2

Бренд: Altronix Страницы: 4

5U Tower Chassis Kit AK34

Бренд: Asus Страницы: 42

5U Tower Chassis Kit AK35

Бренд: Asus Страницы: 46

Бренд: Rasilient Страницы: 32

Бренд: Rinnai Страницы: 2

Бренд: Leviton Страницы: 27

Бренд: Mustang Sampling Страницы: 12

Бренд: Middle Atlantic Products Страницы: 7

Бренд: NetModule Страницы: 2

Бренд: Bosch Страницы: 9

Бренд: QNAP Страницы: 29

Бренд: QNAP Страницы: 41

Бренд: QNAP Страницы: 40

Бренд: QNAP Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды