HP Photosmart R507, Руководство пользователя

Страница: 59 / 179

Chapter 2: Taking Pictures and Recording Video Clips 59
To change the Manual White Balance setting:
1 Point the camera at a white or gray target (such as a piece
of paper), making sure that the entire screen encompasses
the white or gray target.
2 Press the Shutter button (the camera will not take a picture).
The camera then calculates a custom White Balance setting
based on the region inside the focus brackets. During the
calculation,
PROCESSING...
is displayed on the screen. When
the calculation is complete, the color tint in Live View
changes to match the new Manual White Balance setting,
and
WHITE BALANCE SET
is displayed.
3 If needed, repeat steps 1 and 2 until you get the desired
Manual White Balance setting.
4 When you are satisfied with the Manual setting you have
made, press the Menu/OK button to exit the Manual White
Balance screen and return to the Capture Menu .
ISO Speed
NOTE This setting does not apply when recording video clips.
This setting adjusts the sensitivity of the camera to light. When
ISO Speed is set to the default Auto setting, the camera selects
the best ISO speed for the scene.
Lower ISO speeds will capture the best quality images with the
least amount of grain (or noise), but result in slower shutter
speeds. If taking a picture in low light conditions without a
flash at ISO 100 , you may want to use a tripod. In contrast,
higher ISO numbers allow faster shutter speeds, and can be
used when taking pictures in dark areas without a flash, or
pictures of fast moving objects. Higher ISO speeds produce
pictures with more grain (or noise) and, thus, can be of
lower quality.