69
undo description
Default
The description of an interface is
interface-name
Interface
. For example, the default description of
Bridge-Aggregation1 is
Bridge-Aggregation1 Interface
.
Views
Layer 2 aggregate interface view
Default command level
2: System level
Parameters
text
: Specifies the interface description, a string of 1 to 80 characters.
Examples
# Set the description of Layer 2 aggregate interface Bridge-Aggregation 1 to
connect to the lab
.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab
display interface
Use
display interface
to display Layer 2 aggregate interface information.
Syntax
display interface
[
bridge-aggregation
] [
brief
[
down
] ] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
display interface
bridge-aggregation
interface-number
[
brief
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
1: Monitor level
Parameters
bridge-aggregation
: Displays information about Layer 2 aggregate interfaces.
interface-number
: Specifies an existing Layer 2 aggregate interface by its number. The value range
varies by device model. For more information, see
About the Command References for HP Unified
Wired-WLAN Products
.
brief
: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down
: Displays information about interfaces in Down state and the causes. If you do not specify this
keyword, the command displays information about Layer 2 aggregate interfaces in all states.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
