manualshive.com logo in svg

HP PCIe 2-Port 10GbE, Руководство по установке, Страница: 11 / 17

Поделиться
Скачать
HP PCIe 2-Port 10GbE Скачать руководство пользователя страница 11

4 Regulatory Compliance and Safety

Laser device

All HP systems equipped with a laser device comply with safety standards, including International
Electrotechnical Commission (IEC) 825. With specific regard to the laser, the equipment complies
with laser product performance standards set by government agencies as a Class 1 laser product.
The product does not emit hazardous light.

Laser safety warning

WARNING!

To reduce the risk of exposure to hazardous radiation:

•

Do not try to open the laser device enclosure. There are no user-serviceable components inside.

•

Do not operate controls, make adjustments, or perform procedures to the laser device other
than those specified in this document.

•

Allow only HP-authorized service technicians to repair the laser device.

Certification and classification information

This product contains a laser internal to the fiber optic (FO) transceiver for connection to the Fibre
Channel communications port.

In the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirements
contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter
J. A label on the plastic FO transceiver housing indicates the certification.

Outside the USA, the FO transceiver is certified as a Class 1 laser product conforming to the
requirements contained in IEC 825-1:1993 and EN 60825-1:1994, including Amendment 11:1996
and Amendment 2:2001.

Laser product label

The optional label in

Figure 3 (page 11)

or equivalent may be located on the surface of the

HP-supplied laser device.

Figure 3 Class 1 laser product label

This optional label indicates that the product is classified as a CLASS 1 LASER PRODUCT. This
label may appear on the laser device installed in your product.

International notices and statements

Canadian notice (avis Canadien)

Class A equipment

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.

Laser device

11

Содержание PCIe 2-Port 10GbE


















Отзывы:

Нет отзывов