HP Pavilion HDX9000 Скачать руководство пользователя страница 56

Страница: 56 / 163

Lift the right side of the WLAN module compartment cover

(2)

, swing the cover up and to the left,

and remove the cover. The WLAN module compartment cover is included in the Plastics Kit, spare

part number 448171-001.

Disconnect the WLAN antenna cables

(1)

from the WLAN module.

NOTE:

The main WLAN antenna cable (labeled with the number 1 or with a black band) is

connected to the WLAN module “Main” terminal. The white WLAN antenna cable (labeled with the

number 2 or with a white band) is connected to the WLAN module “Aux” terminal. Computer models

equipped with an 802.11a/b/g/n WLAN module will have an additional wireless antenna

cable

(2)

(labeled with the number 3 or with a yellow band). Disconnect this cable.

Remove the two Phillips PM2.5×5.0 screws

(3)

that secure the WLAN module to the system board.

(The edge of the module opposite the slot rises away from the computer.)

Remove the WLAN module

(4)

by pulling it away from the slot at an angle.

NOTE:

WLAN modules are designed with a notch

(5)

to prevent incorrect installation into the

WLAN module slot.

Reverse this procedure to install a WLAN module.

48 Chapter

Removal and replacement procedures

Содержание Pavilion HDX9000




































































































































































Результаты поиска

Содержание Pavilion HDX9000

Отзывы:

HP Pavilion HDX9000, Руководство по техническому обслуживанию и ремонту, Страница: 56 / 163

Результаты поиска

Содержание Pavilion HDX9000

Отзывы: