HP Pavilion HDX9000 Скачать руководство пользователя страница 103

Страница: 103 / 163

Computer Setup menus

The menu tables in this section provide an overview of Computer Setup options.

NOTE:

Some of the Computer Setup menu items listed in this chapter may not be supported by your

computer.

File menu

Select

To do this

System information

●

View identification information about the computer.

●

View specification information for the processor, memory, and system ROM.

Restore defaults

Replace the configuration settings in Computer Setup with factory settings.

(Password and security settings are not changed when you restore the factory

settings.)

Ignore changes and exit

Cancel any changes entered during the current session. Then exit and restart the

computer.

Save changes and exit

Save changes entered during the current session. Then exit and restart the computer.

Your changes go into effect when the computer restarts.

Computer Setup menus 95

Содержание Pavilion HDX9000




































































































































































Результаты поиска

Содержание Pavilion HDX9000

Отзывы:

HP Pavilion HDX9000, Руководство по техническому обслуживанию и ремонту, Страница: 103 / 163

Результаты поиска

Содержание Pavilion HDX9000

Отзывы: