HP Pavilion dv8300 Скачать руководство пользователя страница 37

Страница: 37 / 42

7–12

Power

Battery packs

5. Disconnect the computer from its external power source, but

not

turn off the computer.

6. Run the computer on battery power until the battery pack is

fully discharged.

The battery light begins to blink when the

battery pack has discharged to a low-battery condition. When
the battery pack is fully discharged, the battery light is turned
off and the computer shuts down.

Step 3:

Recharging the battery pack

To recharge the battery pack:

1. Plug the computer into external power and maintain external

power until the battery pack is fully recharged. When the
battery pack is recharged, the battery light on the computer is
turned off.

You can use the computer when the battery pack is
recharging, but the battery pack will charge more quickly if
the computer is off.

2. If the computer is off, turn it on when the battery pack is fully

charged and the battery light is turned off.

3. Access the Power Schemes tab by selecting

Start >

Control Panel > Performance and Maintenance >
Power Options > Power Schemes

tab.

4. Reenter the settings that you recorded for the items in the

Plugged in

column and the

Running on batteries

column.

5. Click

CAUTION:

After calibrating the battery pack, reenable hibernation.

Failure to reenable hibernation may result in a complete battery
discharge and potential information loss.

To reenable hibernation, select

Start > Control Panel >

Performance and Maintenance > Power Options >
Hibernate

tab. Select the

Enable hibernation

check box, and then

click

Apply

Содержание Pavilion dv8300











































Результаты поиска

Содержание Pavilion dv8300

Отзывы:

Бренды по названию

Популярные бренды

HP Pavilion dv8300, Руководство пользователя

Результаты поиска

Содержание Pavilion dv8300

Отзывы:

Бренды по названию

Популярные бренды