HP Pavilion dm4-3000 Скачать руководство пользователя страница 106

Страница: 106 / 121

The wireless network connection is not working

If a wireless network connection is not working as expected, follow these suggestions:

●

Be sure that the wireless light on your computer is on (white). If the wireless light is off, press the

f12

action key to turn it on.

●

Be sure that the device wireless antennas are free from obstructions.

●

Be sure that the DSL or the cable modem and its power cord are properly connected and the
lights are on.

●

Be sure that the wireless router or access point is properly connected to its power adapter and
the DSL or cable modem, and that the lights are on.

●

Disconnect and then reconnect all cables, and turn the power off and then back on.

NOTE:

For more information on wireless technology, refer to the relevant help topics and Web site

links in Help and Support.

NOTE:

For information on activating mobile broadband service (select models only), refer to the

mobile network operator information included with your computer.

Appendix A Troubleshooting and support

Содержание Pavilion dm4-3000


























































































































Результаты поиска

Содержание Pavilion dm4-3000

Отзывы:

Похожие инструкции для Pavilion dm4-3000

Бренды по названию

Популярные бренды

HP Pavilion dm4-3000, Руководство пользователя

Результаты поиска

Содержание Pavilion dm4-3000

Отзывы:

Похожие инструкции для Pavilion dm4-3000

Бренды по названию

Популярные бренды