manualshive.com logo in svg

HP Pavilion 2159m, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP Pavilion 2159m Скачать руководство пользователя страница 2

© Copyright 2015 Hewlett-Packard
Development Company, L.P.

AMD and Radeon are trademarks of Advanced
Micro Devices, Inc. Bluetooth is a trademark
owned by its proprietor and used by Hewlett-
Packard Company under license. Microsoft and
Windows are U.S. registered trademarks of the
Microsoft group of companies. SD Logo is a
trademark of its proprietor.

The information contained herein is subject to
change without notice. The only warranties for
HP products and services are set forth in the
express warranty statements accompanying
such products and services. Nothing herein
should be construed as constituting an
additional warranty. HP shall not be liable for
technical or editorial errors or omissions
contained herein.

First Edition: April 2015

Document Part Number: 807552-001

Product notice

This guide describes features that are common
to most models. Some features may not be
available on your computer.

Not all features are available on all editions of
Windows 8.1. This computer may require
upgraded and/or separately purchased
hardware, drivers, and/or software to take full
advantage of Windows 8.1 functionality. See

http://www.microsoft.com

 for details.

Содержание Pavilion 2159m















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды