HP P9000 Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 128

background image

B When Multiple Versions of Business Continuity Manager

Exist

This section gives notes on upgrade processing when multiple versions of Business Continuity
Manager exist in a system.

Configuration Files

Configuration files created in an older version of Business Continuity Manager can be used in a
newer version as they are. However, once you edit the configuration files created in an older
version of Business Continuity Manager by using a newer version, the older version can no longer
read those configuration files.
Therefore, in an environment where multiple versions of Business Continuity Manager exist, HP
recommends that you use different configuration files for each version of Business Continuity
Manager.

License Information Dataset

The license information dataset can be shared by old and new versions of Business Continuity
Manager. However, the license will be dealt with as an invalid license unless that license is valid
for the relevant version of Business Continuity Manager.

Changed Display for the License Name

In Business Continuity Manager 5.0, display of the P9000 for Business Continuity Manager Extended
CT Group Software license in the Manage Licenses panel was changed.
If Basic is displayed, the Cnt Ac-S Z consistency preservation function has been installed. For the
XP24000/XP20000, the Cnt Ac-S Z consistency function can be used as soon as Basic is installed.
For XP12000/XP10000/XP1024/XP128, in addition to installing BCM Basic, the P9000 for
Business Continuity Manager Extended CT Group Software license must be purchased before the
Cnt Ac-S Z consistency preservation function can be used.

•

In Copycentral 2.0, Business Continuity Manager 3.0, and Business Continuity Manager 4.0
to 4.2:
The license name, Business Continuity Manager Extended CT Group is displayed as

Extended

CT Group

.

•

In Business Continuity Manager 5.0 to 5.3:
The license name, Business Continuity Manager Extended CT Group is displayed as

TC Sync

Extended CTG

.

•

In Business Continuity Manager 5.5 or later:
The Business Continuity Manager Extended CT Group license was combined with the Business
Continuity Manager Basic license. If

Basic

is displayed, the Cnt Ac-S Z consistency

preservation function can be used.

Prefix for the License Information Dataset

Business Continuity Manager versions earlier than 4.1 do not support the Business Continuity
Manager environment variable

YKLCNS2

. Therefore, if both Business Continuity Manager versions

earlier than 4.1 and Business Continuity Manager versions 4.1 or later exist in a system, do not
specify the environment variable

YKLCNS2

. If this parameter is specified, one of the Business

Continuity Managers will not be able to read the license information dataset.

Configuration Files 107

«
...
105
106
107
108
109
...
»

Содержание P9000

































































































































Отзывы:

Нет отзывов

Похожие инструкции для P9000

AirPlus G DWL-G510

Бренд: D-Link Страницы: 12

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 47

S12500X-AF Series

Бренд: H3C Страницы: 3

Бренд: Rainforest Automation Страницы: 29

Бренд: Elnec Страницы: 2

ZyXEL ZyAIR B-400

Бренд: ZyXEL Communications Страницы: 31

Бренд: SENAO Страницы: 25

Бренд: Renesas Страницы: 20

Бренд: Sensaphone Страницы: 2

Бренд: TRUlink Страницы: 34

Бренд: nedis Страницы: 2

Бренд: nedis Страницы: 2

Бренд: nedis Страницы: 2

Бренд: Kvaser Страницы: 21

Бренд: MSG Equipment Страницы: 12

Бренд: Fujitsu Страницы: 49

P-600 - Stylistic LT

Бренд: Fujitsu Страницы: 280

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды