HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Руководство по установке, Страница: 15 / 38

Chapter 1 Prepare Drive for Installation
9
This step assumes the jumpers are accessible. If they are not accessible, it may be
necessary to remove the mounting tray or bracket to adjust the settings.
Each device on the channel needs a different SCSI address. If this is the first hard
drive in the system, complete this step to verify the jumper is set correctly. If this
is one of two or more SCSI devices in the system (and not the first drive), you
must change the SCSI address for the drive.
•
If you are connecting an Ultra3 SCSI drive to a narrow SCSI cable and
narrow SCSI controller, set the SCSI address from 0 to 6.
•
If you are connecting an Ultra3 SCSI drive to a wide SCSI cable and wide
SCSI controller, set the SCSI address from 0 to 15.
Detailed descriptions of all the jumpers are provided in the "Jumper Settings"
appendix. Figures 1-8 to 1-13 show the default SCSI address settings for each
drive.