HP P3413A, Руководство по установке и настройке

Страница: 44 / 82

Chapter 4 Microsoft Windows 2000 Installation
38
In the Data section of the dialog box, the entry in the second row and second
column (to the right of the 0010: entry) lists the error message generated by the
driver. The common error messages for the driver are described below.
Driver Error Messages
The following error messages are listed sequentially according to the last three digits
of the error message. For example, [xxxxx010], [xxxxx011], [xxxxx012], etc.
[xxxxx004] Command completed with error
[xxxxx005] Command completed with error
[xxxxx006] Command completed with error
A request issued to a target device completed with indication that there is an error.
In most cases, the error is recovered and normal operations continue.
[xxxxx010] Error issuing command
An error has occurred while the driver was setting up its internal data structures. Try
installing the most up-to-date version of the driver available from the HP Web site
at:
http://www.hp.com
[xxxxx011] Error issuing command
The requested command is not supported by this driver.
[xxxxx012] Error issuing command
[xxxxxx99] Error issuing command
The driver does not recognize the target device.
NOTE The entry in the third row of the last column identifies the
SCSI ID of the device originating the error.
NOTE When reporting problems to HP Customer Support, be sure to
include the complete error message in your problem
description.