HP P3413A, Руководство по установке и настройке

Страница: 35 / 82

29
Chapter 3 Microsoft Windows NT Installation
[xxxxx032] Target device busy
The target device reports a Busy status. Another program may already be using this
device.
[xxxxx050] Host adapter failure
[xxxxxx9A] Host adapter failure
Your host adapter may not be properly installed or is defective. Try resetting the
adapter in the PCI slot, or try installing it a different PCI slot.
[xxxxx081] Adapter initialization failure
[xxxxxx8A] Adapter initialization failure
[xxxxxx83] Adapter initialization failure
An error has occurred while the driver was setting up its internal data structures.
Verify that your adapter is supported by this version of the driver.
[xxxxx089] Unable to allocate memory
This indicates that there may be a problem with the amount of memory installed in
your system. Verify that your system has at least the minimum amount of memory
required by your operating system.
[xxxxx096] Adapter hardware initialization failure—possible resource
conflict
The driver has attempted to initialize the adapter hardware but failed. This might
suggest that the adapter resources (e.g., IRQ) conflict with another board installed
in your system.
[xxxxx097] Unable to allocate memory
This indicates that there may be a problem with the amount of memory installed in
your system. Verify that your system has at least the minimum amount of memory
required by your operating system.
[xxxxx0af] Unable to de-allocate memory that was allocated for a target
device
Normally, this is not a serious problem, unless you get this message frequently over
a short period of time. The memory can be reclaimed by rebooting the system.