background image

Safety and Maintenance Guidelines

User’s Guide

2–3

Unplug your monitor from the wall outlet before cleaning. 
Do not use liquid cleaners or aerosol cleaners. Use a damp 
cloth for cleaning. If the screen requires additional cleaning, 
use an antistatic screen cleaner.

Slots and openings in the cabinet are provided for ventilation. 
These openings must not be blocked or covered. Never push 
objects of any kind into cabinet slots or other openings.

Do not drop your monitor or place it on an unstable surface.

Do not allow anything to rest on the power cord. Do not walk 
on the cord.

Keep your monitor in a well-ventilated area, away from 
excessive light, heat or moisture. 

Cleaning the Monitor

To clean the monitor, follow these steps:

1. Turn off the monitor and the computer.

2. Dust the monitor by wiping the screen and the cabinet with a 

soft, clean cloth.

If the screen requires additional cleaning, use a clean, damp cloth.

Ä

CAUTION: 

Do not use alcohol, benzene, thinner, ammonia, or any 

other volatile substances to clean your monitor or the screen. These 
chemicals may damage the cabinet finish as well as the screen.

Shipping the Monitor

Keep the original packing box in a storage area. You may need it 
later if you move or ship your monitor.

Содержание P1230 - 22" CRT Display



































Отзывы: