HP OmniBook VT6200 Скачать руководство пользователя страница 125

Страница: 125 / 189

Troubleshooting and Maintenance

Troubleshooting Your Computer

Corporate Evaluator’s Guide

125

If sound does not record

•

Check the software controls for recording sound: click Start, Programs (or All
Programs), Accessories, Multimedia (or Entertainment), Sound Recorder.

•

In Volume Control, click Options, Properties, and make sure the microphone is
enabled in the recording controls.

•

Test the audio with the e-Diagtools diagnostics. See “Testing the Hardware” on
page 146.

If you hear a loud high-pitched whine (feedback) from the speakers

•

In the Volume Control, try reducing the Master volume: double-click the speaker icon
in the taskbar.

•

In Volume Control, click Options, Properties, and select the microphone option for
the playback settings. Then in Volume Control, make sure the microphone is muted.

•

Avoid using the built-in microphone and built-in speaker at the same time.

CD-ROM and DVD Problems

If you can’t boot from a CD or DVD in the CD/DVD drive

•

Make sure the CD or DVD is bootable, such as the Recovery CD.

•

Make sure the CD-ROM/DVD drive is selected as the boot device—see “To change
the boot device” on page 30.

•

Restart the computer: click Start, Shut Down (or Turn Off Computer), Restart.

•

Test the DVD drive with the e-Diagtools diagnostics. See “Testing the Hardware” on
page 146.

If a DVD plays erratically

•

Dirt or smudges can cause a disc to skip. Clean the disc with a soft cloth. If the disc is
badly scratched, it will probably have to be replaced.

•

If you’re playing the DVD on battery power, try changing the power scheme. See the
hint under “To play DVD movies” on page 75.

Содержание OmniBook VT6200






























































































































































































Результаты поиска

Содержание OmniBook VT6200

Отзывы:

Похожие инструкции для OmniBook VT6200

Бренды по названию

Популярные бренды

HP OmniBook VT6200, Руководство пользователя

Результаты поиска

Содержание OmniBook VT6200

Отзывы:

Похожие инструкции для OmniBook VT6200

Бренды по названию

Популярные бренды