Display assembly
Description
Spare part number
15.6-in, HD, LED display assembly (includes microphone and wireless antenna transceivers and cables)
AntiGlare display assembly with pewter finish equipped with a webcam
646842-001
AntiGlare display assembly with pewter finish not equipped with a webcam
646841-001
BrightView display assembly with pewter finish equipped with a webcam
646844-001
BrightView display assembly with pewter finish not equipped with a webcam
646843-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 43
), and then remove the following components:
{
Optical drive (see
Optical drive (select models only) on page 44
)
{
WLAN module (see
WLAN module on page 47
)
{
Keyboard (see
Keyboard on page 53
)
{
Top cover (see
Top cover on page 56
)
{
USB board (see
USB board on page 62
)
{
Power connector cable (see
Power connector cable on page 63
)
Remove the display assembly:
1.
Disconnect the display panel cable
(1)
from the system board.
2.
Release the wireless antenna cables from the clips
(2)
built into the base enclosure.
CAUTION:
Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other
computer components.
3.
Remove the four Phillips PM2.5×6.0 screws
(3)
that secure the display assembly to the computer.
68
Chapter 4 Removal and replacement procedures
Содержание Officejet 635
Страница 2: ...HP 630 HP 631 HP 635 and HP 636 Notebook PC Maintenance and Service Guide ...
Страница 5: ...iv Safety warning notice ...
Страница 9: ...viii ...